[icedcappucino]

Problem:

1) Scale
Produced from hard waters when excessive make-up is required and results in efficiency loss due to drop in heat transfer.

Solution:

A) Use evaporated sea water. If significant amounts of shore water is used for make-up, eliminate root cause of requiring excessive make-up and consider dosing scale inhibitor.

———-

Problem:

2) Corrosion
Usually in the form of general wastage, but pitting, crevice corrosion, galvanic corrosion, stress corrosion and erosion can also occur. The products of corrosion can form an insulating scale interfering with heat transfer. Pitting, crevice corrosion etc. may lead to complete failure of that component.

Solution:

B) Dosage of Nitrite (protects cast iron, steel, and aluminium alloys) inhibits/arrests corrosion of metal.

—

Jacket Water Test

1) Nitrite

2) pH

3) Chloride

Less commonly, Hardness test

• This topic was modified 4 years, 10 months ago by icedcappucino.

[cat60y]

Understood from the above that Evaporated seawater meaning our distilled water generated from fresh water generator.

Ive only know of 2 chemical suppliers, DREW MARINE & UNITOR

For Unitor, jacket water treatment are using Natfleet to increase Nitrate levels. Nitrate levels are best kept above 1200.

[Author]

Posts