[Admin]

Daily checks 

• Check the lubrication
• Check the noise level by operating the crane without load
• Check the heat generation
• Check all the limits and trips are working properly
• Check the contact areas of electrical equipment
• Check the brake operation
• Check condition of clamp in the hook

2)PMS 

• Overhauling of motor
• Greasing of wires
• Renewal of wire ropes
• Annual survey
• Load test

 

1. Grease: Wire ropes, rollers, plain bearings are applied with grease for smooth working.
2. Oil: Lube oil is used for lubrication of ball bearing and roller bearing of hoisting and slewing gears. Check the oil level regularly and replenish once the level is below the mark. The
3. Inspect the wire rope for twisting, any unstable, any fracture
4. Inspect The Gears: for any noise, damage on teeth
5. Check Condition Of Sheave/pulley
6. Hook condition
7. Brake condition: The engine room crane is equipped with electromagnetic brake with fail-safe arrangement. This is the most important safety arrangement provided in the crane

[Author]

Posts