-
Admin replied to the topic COC 1 (Engine) Oral Questions in the forum COC (Engine) past oral questions 6 days, 19 hours ago
2026 updates
Date: 28-Oct-26
Examiners: Mr David and Mr Zahir
Time: 0900AM
4 candidates, 3 pass.1. Sketch Centrifugal pump
2. Explain the working principle of the pump.
3. How would you prepare the pump for survey as a chief engineer and What are the things surveyor would check.
4. What are the pump clearance you need to note and how you…[Read more] -
Admin replied to the topic COC 2 (Engine) Oral Questions in the forum COC (Engine) past oral questions 6 days, 19 hours ago
2026 questions
04-Oct-2026
Four candidates.
1. Earth fault lamp diagram, no cross questions.
2. What is the stroboscopic effect, how to prevent this. What is the second engineer’s responsibility.
3. Old piston overhauling complete procedure and checks. Don’t forget the stuffing box.
4. What is DSD( stsds) and in which solas it is mentioned.
5.…[Read more] -
Admin replied to the topic COC 5 (Engine) Oral Questions in the forum COC (Engine) past oral questions 6 days, 19 hours ago
Updated with 2026 questions
Aug 2026, 2 examiners 3 students
1. Where can you find manometer ? (Ideally 3 places)
– What it’s measuring
- What it indicates, and hence what to do if something wrong2. FWG vacuum (don’t say in %)
– what’s the reading on gauge in mmhg
- what’s mmhg
– what’s FWG jacket FW inlet temp
- shell temp
- how is va…[Read more] -
Admin replied to the topic What to do after cadetship in the forum After cadetship 1 week, 1 day ago
How to prepare for your CoC 5 oral exam:
1. Preparation
2. Actual past questions
3. Question and answer bank -
Admin started the topic COC 5 (Engine) Oral possible question bank in the forum COC (Engine) past oral questions 1 week, 1 day ago
How to use this paper
Questions 1-70 are MCQs. Questions 71-100 are open-ended oral questions. Attempt without notes. The answer key
and model-answer points are placed at the back.Section A – 70 Multiple Choice Questions
Choose the best answer. Do not look at the answer key until you finish.
1. Where might a manometer commonly be used…[Read more] -
Admin replied to the topic Engine cadet intake – does shipyard experience as a fitter count? in the forum Before cadetship 1 week, 1 day ago
Hello, welcome to our community!
As far as I’m aware, the minimum academic requirement to become an engine cadet in Singapore is a diploma in marine engineering. It’s mostly the same for other major seafaring countries (India, Philippines, China etc) and western countries (US and UK) as well, before they are accepted by shipping companies for…[Read more] -
Admin started the topic COC 5 orals preparation in the forum How to handle oral exams (COC 1, 2, 5) 1 week, 1 day ago
Things to note before the oral
• Format experienced by the candidate: 2 examiners, about 1 hour, 3 candidates. Much of the questioning was
open-floor, although an examiner may direct a question to a specific candidate.
• Do not rush. Answer exactly what was asked. Speaking faster can simply create room for more questions. A short,
correct and saf…[Read more] -
Admin replied to the topic Foreigners eligibilty For COC class 5 in Singapore in the forum Promotional criteria, interview & taking over checklist 1 week, 1 day ago
https://www.sp.edu.sg/pace/courses/all-courses/course-details/graduate-mechanical-engineer-(certificate-of-competency-class-5-marine-engineer-officer) Please contact the school with your enquiry!
-
Admin wrote a new post 1 month, 1 week ago
Oct 2026 updates
Hello all! I was delighted to meet fellow seafarer friends again after coming back from a very long contract, and got to know some new cats cadets who […] -
Admin replied to the topic Guide for engine cadets in the forum Before cadetship 1 month, 1 week ago
Refer to the first two posts as I’ve updated the content!
-
Admin wrote a new post 8 months ago
6 years old / 2026
Selamat Hari Raya Aidilfitri! Writing this belated anniversary post with hotspot from phone with e-sim in Palembang anchorage, Indonesia. Naturally, […] -
Admin wrote a new post 11 months, 4 weeks ago
Nov 2025 updates
Starting to lose count of the number of offline seafarer gatherings, which is probably a good sign 🙂 Had our very first Kuala Lumpur seafarer trip which […] -
Admin started the topic No. 0583 Oil spill response in the forum Marine Legislation 11 months, 4 weeks ago
Q: Is the following statement true or false? ‘Oil spills only occur during cargo loading and discharging operations.’
A: False.Q: Tanks can overfill because of human error, possibly leading to a spill. Which of the following options could cause a tank to overfill?
x A: A vacuum lock in the filling valveQ: Which of the following statements is…[Read more]
-
Admin started the topic No. 0426 Gas measurement, measuring instruments in the forum Safety 11 months, 4 weeks ago
Q: When carrying out checks of the atmosphere in a cargo tank following gas freeing, at how many levels in the tank should samples be taken to ensure there are no variations in the tank atmosphere? Select the ONE correct answer.
XX A: Samples should be taken every metre depth in the tank.Q: Which of the options correctly fills the gap? ‘The…[Read more]
-
Admin started the topic No. 0425 Gas measurement, a safe atmosphere in the forum Safety 11 months, 4 weeks ago
Q: When rusting of a ship’s steelworks occurs, which ONE of the following is the main effect on the air inside a ballast tank or cargo tank?
A: The oxygen content of the air decreases.Q: Which of the following toxicity threshold limit exposure terms would normally have the lowest numerical value?
A: TLV-CQ: Which term is used for the property…[Read more]
-
Admin started the topic No. 0421 Ballast water management, the BWM Convention in the forum Marine Legislation 11 months, 4 weeks ago
Q: Why have many of the natural barriers to the spread of species reduced? Select the TWO best answers.
A: Rapidly increasing world trade. Larger and faster ships completing their voyages in a shorter time.Q: What is the estimated number of species transported by ship ballast?
A: More than 10,000 speciesQ: According to this module, which three…[Read more]
-
Admin started the topic No. 0388 Enclosed space entry, the entry preparation in the forum Safety 11 months, 4 weeks ago
Q: How should entry to an enclosed space be controlled? Select the ONE correct answer.
A: The attendant should keep a record (tally) on who goes in and comes out.Q: During an entry to an enclosed space, where should rescue equipment be located? Select the ONE correct answer.
A: At the entrance to the space.Q: If you are inside an enclosed…[Read more]
-
Admin started the topic No. 0387 Enclosed space entry, Hazard awareness and preparations for entry in the forum Safety 11 months, 4 weeks ago
Q: Which ONE of the following is the best definition of an enclosed space? Select the ONE best answer.
A: Any space with limited openings for entry and exit or poor ventilation.Q: How much oxygen is present in normal atmospheric air? Select the ONE correct answer.
A: 21% by volume.Q: What is the maximum acceptable reading on a flammable gas…[Read more]
-
Admin started the topic No. 0358 SOPEP, Your role in the forum Marine Legislation 11 months, 4 weeks ago
Q: Which of the following demonstrates a positive type of behaviour?
A: Responsive.Q: Why is it important to have pollution drills?
A: They ensure that planned procedures will work.Q: How does a crewmember know what their role is in the emergency pollution plan?
A: They will be briefed for it and it may also be shown on the muster list.Q:…[Read more]
-
Admin started the topic No. 0310 Working at height in the forum Safety 11 months, 4 weeks ago
Q: Which of the following BEST defines the term ‘working at height’?
A: When a worker is able to fall from one level to another, and be injured in doing so.Q: Is the following statement true or false? ‘Before starting any work at height, there should be a full risk assessment undertaken and a permit to work issued.’
A: TrueQ: How many points…[Read more]
- Load More
